-
POWER CLASS Rated Maximum Power(Pmax) [W] 450w Open Circuit Voltage(Voc) [V] 53.15 Maximum Power Voltage(Vmp) [V] 44.06 Short Circuit Current(Isc) [A] 10.62 Maximum Power Current(Imp) [A] 10.05 Module Efficiency [%] 19.7% 20.0% Weight 25.5kg Numbers of cells 6 × 26 monocrystalline solar semi-cells(MBB) Cell dimension(mm) 166*166 Dimensions(mm) 2163*1030*35mm Standard test condition Irradiance 1000W/m²,Module temperature 25℃, AM=1.5
-
Maximum Power (Pmax) 535 Maximum Power Voltage (Vmp) 43.4 Maximum Power Current (Imp) 12.34v Open-circuit Voltage (Voc) 51.5v Short-circuit Current (Isc) 12.1 Module Efficiency STC (%) 20.55
-
AC Charge current 0-24A adjustable Air-cooled type radiator, great energysaving effect Strong loading capacity; peak power more than 3time Added fault code query function, easy to monitor the operation in real-time supports diesel or gasoline generator, adapt any tough electricity situation RS232 Communication port optional Pure sine wave output
-
Over 20 years design life at floating condition @ 25°C Wide operating temperature range from -40°C to 60°C Tubular positive plate with prolonged cycle life Fumed Silica gel electrolyte 5.Lead Calcium die cast grid with improved corrosion resistance capability Low self-discharge rate and long shelf life Excellent deep discharge recovery capability
-
Luminous Solar 1.5K VA is a powerful hybrid inverter with 40 Amp inbuilt charge Controller. It is India's most intelligent solar system which gives priority to solar power use to save on electricity bills. The Solar Inverter charges the battery from grid and Solar panel both. If Sun energy is available then It charges the battery from solar Panel and if Solar is not available, then the inverter charges the battery from Mains/Grid. It can charge the battery and supply solar power to connected load if solar generation is sufficient otherwise it gives first priority to solar battery charging and then supply additional power to connected loads.
-
MODEL 200 AH NRGT+ Capacity 200AH Voltage (Input) 12V Supported UPS (VA rating) 600VA – 10 KVA Dry weight (±5% Kg) 63 Filled weight (±5% Kg) 65.50
-
MPPT Solar Controller 60A 12V/24V Auto recognition MPPT efficiency can reach 99.9% Maximum input voltage : 150V Heat sink design at the back for cooling
-
MC connector systems The components of the MC connector system for photovoltaics are designed to allow time-saving and safe serial and parallel wiring of PV modules for building integrated and free-standing solar installations. For practical use the connector system MC4 are available, depending on the existing modules or inverters. The interlockable MC4 connector systems n […]
-
12V/24V/36V/48V MPPT Solar Controller 100A Maximum input voltage : 250V Heat sink design at the back for cooling
-
12V/24V/36V/48V MPPT Solar Controller 60A Maximum input voltage : 145Vdc Fan cooling
-
1.1kva,12v pure sine wave inverter, build in ups to Protect the inverter, auto charging, build in charging controller, copper coil pure sine wave, adjustable charging It automatically changes from mains to UPS when there is a power cut and vice versa when the current returns. So, you don’t have to switch the UPS on and off each time. It has an efficiency rating of more than 80 percent, which means you can get more value for your money. The Microtek 1.1KVA UPS features Digital Signal Controller (DSC) Based Intelligent Control Design to deliver consistent performance, day after day
-
The MNDC Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included. The panel mount plates allow for mounting the 3/4″ 125VDC breakers that range from 60 amps to 100 amps. You can also fit […]
-
The MNDC Plus version of the popular MNDC adds another din rail allowing up to ten din rail mount breakers. Two din rail cover plates and two panel mount plates are included. The panel mount plates allow for mounting the 3/4″ 125VDC breakers that range from 60 amps to 100 amps. You can also fit […]
-
-
12V/24V MPPT Solar Controller 40A Maximum input voltage : 100Vdc Heat sink design at the back for cooling
-
12V/24V/36V/48V MPPT Solar Controller 60A Maximum input voltage : 145V Heat sink design at the back for cooling
0201271000024/7 Support Center
0201271000024/7 Support Center
Install Our Apps
Now on App Store & Google Play
Secure Payment Gateways
© 2024 Phoz Energy | All rights reserved.
Home 
Whishlist 
Compare 
Checkout 
Account - Image
- SKU
- Rating
- Price
- Stock
- Availability
- Add to cart
- Description
- Content
- Weight
- Dimensions
- Additional information